PartsTable
Technical Data Sheet
PartsTable / COMPONENT / KEENLY
KEENLY ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The ADAPTER,SWITCH ACTUATOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: FLAT RACE SURFACE, STAGGERED BALL RETAINER, bore_smallest_diameter: 1.0675 INCHES MINIMUM AND 1.0695 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KEENLY
NSN: 3110-00-155-9150
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorFLAT RACE SURFACE, STAGGERED BALL RETAINER
bore_smallest_diameter1.0675 INCHES MINIMUM AND 1.0695 INCHES MAXIMUM IN
overall_outside_diameter1.9668 INCHES MINIMUM AND 1.9688 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-155-9150
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: KEENLY · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 1.0675 INCHES MINIMUM AND 1.0695 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.9668 INCHES MINIMUM AND 1.9688 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: FLAT RACE SURFACE, STAGGERED BALL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER1.0675 INCHES MINIMUM AND 1.0695 INCHES MAXIMUM IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.9668 INCHES MINIMUM AND 1.9688 INCHES MAXIMUM IN
OVERALL HEIGHT0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN
SURFACE FINISHGROUND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORFLAT RACE SURFACE, STAGGERED BALL RETAINER
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
FT10Interchangeable
interchangeable cross-reference
interchangeable
116380Interchangeable
interchangeable cross-reference
interchangeable
0920561Interchangeable
interchangeable cross-reference
interchangeable
MMF216020002Interchangeable
interchangeable cross-reference
interchangeable
PMC53010Interchangeable
interchangeable cross-reference
interchangeable
21F97Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy KEENLY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KEENLY?
KEENLY is a ADAPTER,SWITCH ACTUATOR.
What parts can replace KEENLY?
There are 21 known substitutes for KEENLY: FT10, 116380, 0920561 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KEENLY?
KEENLY is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KEENLY

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026