PartsTable
Technical Data Sheet
Download PDF

KDJ12C016-241 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

KDJ12C016-241: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER, corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.5475 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE, hardness_rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-006-4815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KDJ12C016-241
NSN: 3120-00-006-4815
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 97613 — SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARINGS (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
corner_shapeSQUARE INSIDE LEFT CORNER
flange_width0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length0.5475 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
hardness_rating27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
special_featuresPLASTIC/POLYTETRAFLUOROETHYLENE/ LINER BONDED TO LEFT END SURFACE OF FLANGE
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.7505 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN
body_outside_diameter0.9388 INCHES MINIMUM AND 0.9393 INCHES MAXIMUM IN
flange_outside_diameter1.4800 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
NSN3120-00-006-4815
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: KDJ12C016-241 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
SUBSTITUTES & CROSS-REFERENCES 4
MS21241-12C016Reference document
Same NSN cross-reference
Reference document — Secondary reference
103-2012-016Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS81934Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
ATLF12SS16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy KDJ12C016-241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KDJ12C016-241?
KDJ12C016-241 is a BEARING,SLEEVE.
What parts can replace KDJ12C016-241?
There are 4 known substitutes for KDJ12C016-241: MS21241-12C016, 103-2012-016, AS81934 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KDJ12C016-241?
KDJ12C016-241 is cataloged in the U.S. Government catalog under NSN 3120-00-006-4815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KDJ12C016-241