PartsTable
Technical Data Sheet
Download PDF

KDJ10C011-342 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

KDJ10C011-342: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OR STEEL COMP 410 OUTER LAYER, corner_shape: SQUARE OUTSIDE LEFT CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.3912 INCHES MINIMUM AND 0.4062 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE, hardness_rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-030-9377, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KDJ10C011-342
NSN: 3120-01-030-9377
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 97613 — SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARINGS (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OR STEEL COMP 410 OUTER LAYER
corner_shapeSQUARE OUTSIDE LEFT CORNER
flange_width0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length0.3912 INCHES MINIMUM AND 0.4062 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
hardness_rating27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
special_featuresPLASTIC,POLYTETRAFLUOROETHYLENE LINER BONDED TO LEFT END SURFACE OF FLANGE
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
body_outside_diameter0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
flange_outside_diameter1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
NSN3120-01-030-9377
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: KDJ10C011-342 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES INTERNAL ROD END BODY
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
SUBSTITUTES & CROSS-REFERENCES 9
ADLF10C011Reference document
Same NSN cross-reference
Reference document — Secondary reference
FBJW20TH11MReference document
Same NSN cross-reference
Reference document — Secondary reference
123-2010C011Reference document
Same NSN cross-reference
Reference document — Secondary reference
KRJ10UDSB-011SReference document
Same NSN cross-reference
Reference document — Secondary reference
04A076-10C011Reference document
Same NSN cross-reference
Reference document — Secondary reference
M81934/2-10C011Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy KDJ10C011-342?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KDJ10C011-342?
KDJ10C011-342 is a BEARING,SLEEVE.
What parts can replace KDJ10C011-342?
There are 9 known substitutes for KDJ10C011-342: ADLF10C011, FBJW20TH11M, 123-2010C011 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KDJ10C011-342?
KDJ10C011-342 is cataloged in the U.S. Government catalog under NSN 3120-01-030-9377. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KDJ10C011-342

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.