PartsTable
Technical Data Sheet
Download PDF

KC6626 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

KC6626: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.250 INCHES NOMINAL IN, first_leg_length: 2.250 INCHES NOMINAL IN, second_leg_style: END RADIUS, second_leg_width: 1.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-753-9672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KC6626
NSN: 5340-00-753-9672
FSC: 5340 — Hardware, Commercial
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width3.250 INCHES NOMINAL IN
first_leg_length2.250 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width1.625 INCHES NOMINAL IN
special_featuresCHAMFER ON FIRST LEG,SLOT IN SECOND LEG
style_designatorANGLE
second_leg_length2.656 INCHES NOMINAL IN
first_leg_thickness0.250 INCHES NOMINAL IN
second_leg_thickness0.250 INCHES NOMINAL IN
second_leg_end_radius0.500 INCHES NOMINAL IN
NSN5340-00-753-9672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KC6626 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.656 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 1.625 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.656 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.625 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.656 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG WIDTH1.625 INCHES NOMINAL IN
SECOND LEG LENGTH2.656 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
SECOND LEG THICKNESS0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
955414Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340007539672Reference document
Same NSN cross-reference
Reference document — Informative reference only
1186N2Reference document
Same NSN cross-reference
Reference document — Secondary reference
2510007539672Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy KC6626?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KC6626?
KC6626 is a BRACKET,ANGLE.
What parts can replace KC6626?
There are 4 known substitutes for KC6626: 955414, 5340007539672, 1186N2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KC6626?
KC6626 is cataloged in the U.S. Government catalog under NSN 5340-00-753-9672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KC6626

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.