PartsTable
Technical Data Sheet
Download PDF

KC49432-503 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

KC49432-503: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 0.25 RADIANS NOMINAL, first_leg_style: SQUARE, first_leg_width: 2.3500 INCHES NOMINAL IN, first_leg_length: 2.0600 INCHES NOMINAL IN, second_leg_angle: 0.2500 RADIANS NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-448-1178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KC49432-503
NSN: 5340-01-448-1178
FSC: 5340 — Hardware, Commercial
CAGE: 18118 — TOLO INCORPORATED DBA BFGOODRICH AEROSPACE, TOLO DIVISION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle0.25 RADIANS NOMINAL
first_leg_styleSQUARE
first_leg_width2.3500 INCHES NOMINAL IN
first_leg_length2.0600 INCHES NOMINAL IN
second_leg_angle0.2500 RADIANS NOMINAL
style_designatorADJACENT ANGLES
second_leg_length2.0600 INCHES NOMINAL IN
first_leg_thickness0.0630 INCHES NOMINAL IN
center_section_width6.2500 INCHES NOMINAL IN
second_leg_thickness0.0630 INCHES NOMINAL IN
center_section_height2.3500 INCHES NOMINAL IN
NSN5340-01-448-1178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KC49432-503 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 0.25 RADIANS NOMINAL
•
CENTER SECTION THICKNESS: 0.0630 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG ANGLE: 0.2500 RADIANS NOMINAL
•
SECOND LEG LENGTH: 2.0600 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
CENTER SECTION WIDTH: 6.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ADJACENT ANGLES
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE0.25 RADIANS NOMINAL
CENTER SECTION THICKNESS0.0630 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG ANGLE0.2500 RADIANS NOMINAL
SECOND LEG LENGTH2.0600 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
CENTER SECTION WIDTH6.2500 INCHES NOMINAL IN
STYLE DESIGNATORADJACENT ANGLES
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy KC49432-503?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KC49432-503?
KC49432-503 is a BRACKET,DOUBLE ANGLE.
What is the NSN for KC49432-503?
KC49432-503 is cataloged in the U.S. Government catalog under NSN 5340-01-448-1178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KC49432-503

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.