PartsTable
Technical Data Sheet
Download PDF

KC1853 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

KC1853: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include overall_length: 26.438 INCHES MINIMUM AND 26.562 INCHES MAXIMUM IN, overall_diameter: 1.996 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, drilled_hole_location: ONE END, distance_from_end_to_hole_center: 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-741-3463, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KC1853
NSN: 5340-00-741-3463
FSC: 5340 — Hardware, Commercial
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
overall_length26.438 INCHES MINIMUM AND 26.562 INCHES MAXIMUM IN
overall_diameter1.996 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
drilled_hole_locationONE END
distance_from_end_to_hole_center1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5340-00-741-3463
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KC1853 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.996 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
DRILLED HOLE LOCATION: ONE END
•
DISTANCE FROM END TO HOLE CENTER: 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.996 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
DRILLED HOLE LOCATIONONE END
OVERALL LENGTH26.438 INCHES MINIMUM AND 26.562 INCHES MAXIMUM IN
DISTANCE FROM END TO HOLE CENTER1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
145426HReference document
Same NSN cross-reference
Reference document — Secondary reference
2FWU305QReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy KC1853?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KC1853?
KC1853 is a ROD,STRAIGHT,HEADLESS.
What parts can replace KC1853?
There are 2 known substitutes for KC1853: 145426H, 2FWU305Q. Substitute compatibility should be verified for your specific system.
What is the NSN for KC1853?
KC1853 is cataloged in the U.S. Government catalog under NSN 5340-00-741-3463. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KC1853