KBE3-130 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

KBE3-130: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: GREASE LUBRICATION, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, overall_length: 1.9375 INCHES MINIMUM AND 1.9575 INCHES MAXIMUM IN, thread_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-508-6248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

KBE3-130

NSN: 3120-00-508-6248
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 97613 — SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARINGS (USA)

SPECIFICATIONS

material	GREASE LUBRICATION
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
overall_length	1.9375 INCHES MINIMUM AND 1.9575 INCHES MAXIMUM IN
thread_diameter	0.312 INCHES NOMINAL IN
special_features	STD NAS 559 KEYWAY IN SHANK
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
features_provided	FLUSH LUBRICATION FITTING
inner_member_width	0.4370 INCHES NOMINAL IN
outer_member_width	0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN
NSN	3120-00-508-6248

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.0000 INCHES NOMINAL IN

•

BORE CENTER TO SHANK END DISTANCE: 1.5620 INCHES NOMINAL IN

•

INNER MEMBER WIDTH: 0.4370 INCHES NOMINAL IN

•

OUTER MEMBER WIDTH: 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: BALL TYPE

•

THREAD DIAMETER: 0.312 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.0000 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE	1.5620 INCHES NOMINAL IN
INNER MEMBER WIDTH	0.4370 INCHES NOMINAL IN
OUTER MEMBER WIDTH	0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.312 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
OVERALL LENGTH	1.9375 INCHES MINIMUM AND 1.9575 INCHES MAXIMUM IN
FEATURES PROVIDED	FLUSH LUBRICATION FITTING
THREAD DIRECTION	RIGHT-HAND

SUBSTITUTES & CROSS-REFERENCES 6

CRBE-3-118Reference document

Same NSN cross-reference

Reference document — Secondary reference

BRES3090LMILG23827Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

01-521-03-12MILG23827Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

01-521-03-12MILGReference document

Same NSN cross-reference

Reference document — Secondary reference

51253-0312Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

23827Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy KBE3-130?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is KBE3-130?

KBE3-130 is a BEARING,PLAIN,ROD END.

What parts can replace KBE3-130?

There are 6 known substitutes for KBE3-130: CRBE-3-118, BRES3090LMILG23827, 01-521-03-12MILG23827 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for KBE3-130?

KBE3-130 is cataloged in the U.S. Government catalog under NSN 3120-00-508-6248. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

KBE3-130 — BEARING,PLAIN,ROD END

Request a Quote — KBE3-130