PartsTable
Technical Data Sheet
PartsTable / COMPONENT / KB14-134
KB14-134 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SHIELD,EXPANSION is a the manufacturer industrial component. Key specifications include material: STEEL, insert_size: 0.250 IN. DIA IN, fastener_type: NUT, overall_length: 1.625 INCHES NOMINAL IN, style_designator: SINGLE EXPANSION MACHINE SCREW, thread_provision: THREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-106-5556, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KB14-134
NSN: 5340-01-106-5556
FSC: 5340
CAGE: 11239 — HILTI INC (USA)
SPECIFICATIONS
materialSTEEL
insert_size0.250 IN. DIA IN
fastener_typeNUT
unit_quantity1
overall_length1.625 INCHES NOMINAL IN
style_designatorSINGLE EXPANSION MACHINE SCREW
thread_provisionTHREADED
surface_treatmentZINC AND CHROMATE
hole_accommodation_diameter0.250 INCHES NOMINAL IN
insert_type_for_which_designedSTUD BOLT
NSN5340-01-106-5556
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: KB14-134 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE EXPANSION MACHINE SCREW
•
INSERT SIZE: 0.250 IN. DIA IN
•
INSERT TYPE FOR WHICH DESIGNED: STUD BOLT
•
MATERIAL: STEEL
•
UNIT QUANTITY: 1
•
SURFACE TREATMENT: ZINC AND CHROMATE
•
HOLE ACCOMMODATION DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE EXPANSION MACHINE SCREW
INSERT SIZE0.250 IN. DIA IN
INSERT TYPE FOR WHICH DESIGNEDSTUD BOLT
MATERIALSTEEL
UNIT QUANTITY1
OVERALL LENGTH1.625 INCHES NOMINAL IN
SURFACE TREATMENTZINC AND CHROMATE
HOLE ACCOMMODATION DIAMETER0.250 INCHES NOMINAL IN
THREAD PROVISIONTHREADED
FASTENER TYPENUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
C54583Interchangeable
interchangeable cross-reference
interchangeable
14158Interchangeable
interchangeable cross-reference
interchangeable
12223Interchangeable
interchangeable cross-reference
interchangeable
T-249-CInterchangeable
interchangeable cross-reference
interchangeable
1414+8Interchangeable
interchangeable cross-reference
interchangeable
2103-08-00-2520NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy KB14-134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KB14-134?
KB14-134 is a SHIELD,EXPANSION.
What parts can replace KB14-134?
There are 20 known substitutes for KB14-134: C54583, 14158, 12223 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for KB14-134?
KB14-134 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-106-5556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KB14-134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026