PartsTable
Technical Data Sheet
Download PDF

KA47XPMILL8937 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

KA47XPMILL8937: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 4.7500 INCHES NOMINAL IN, overall_width: 0.2500 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-180-6970, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
KA47XPMILL8937
NSN: 3110-00-180-6970
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter4.7500 INCHES NOMINAL IN
overall_width0.2500 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designator4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE
lubrication_materialLUBRICANT
overall_outside_diameter5.2500 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-180-6970
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: KA47XPMILL8937 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: 4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 5.2500 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATOR4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE
OVERALL WIDTH0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER5.2500 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 1
004365Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy KA47XPMILL8937?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is KA47XPMILL8937?
KA47XPMILL8937 is a BEARING,BALL,ANNULAR.
What parts can replace KA47XPMILL8937?
There is 1 known substitute for KA47XPMILL8937: 004365. Substitute compatibility should be verified for your specific system.
What is the NSN for KA47XPMILL8937?
KA47XPMILL8937 is cataloged in the U.S. Government catalog under NSN 3110-00-180-6970. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — KA47XPMILL8937