PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K9701035
K9701035 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, overall_width: 1.938 INCHES NOMINAL IN, aperture_width: 1.312 INCHES NOMINAL IN, overall_length: 3.062 INCHES NOMINAL IN, aperture_length: 2.438 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-5525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K9701035
NSN: 5330-00-297-5525
FSC: 5330
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
overall_width1.938 INCHES NOMINAL IN
aperture_width1.312 INCHES NOMINAL IN
overall_length3.062 INCHES NOMINAL IN
aperture_length2.438 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
inside_corner_radius0.250 INCHES NOMINAL IN
outside_corner_radius0.219 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-297-5525
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K9701035 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
APERTURE WIDTH: 1.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
OVERALL WIDTH1.938 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
OVERALL LENGTH3.062 INCHES NOMINAL IN
APERTURE WIDTH1.312 INCHES NOMINAL IN
APERTURE LENGTH2.438 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.219 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
699151Interchangeable
interchangeable cross-reference
interchangeable
C2365-22Interchangeable
interchangeable cross-reference
interchangeable
2-329456-1Interchangeable
interchangeable cross-reference
interchangeable
5L.6611.001.93Interchangeable
interchangeable cross-reference
interchangeable
714330Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K9701035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K9701035?
K9701035 is a GASKET.
What parts can replace K9701035?
There are 5 known substitutes for K9701035: 699151, C2365-22, 2-329456-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K9701035?
K9701035 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-5525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K9701035

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026