PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K700003
K700003 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include alignment_type: RIGID, overall_height: 0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM IN, surface_finish: GROUND, overall_outside_diameter: 3.1150 INCHES MINIMUM AND 3.1350 INCHES MAXIMUM IN, retainer_fabrication_method: PRESSED, thrust_directional_capability_designation: SINGLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-933-3807, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K700003
NSN: 3110-00-933-3807
FSC: 3110
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
alignment_typeRIGID
overall_height0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM IN
surface_finishGROUND
overall_outside_diameter3.1150 INCHES MINIMUM AND 3.1350 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
thrust_directional_capability_designationSINGLE
NSN3110-00-933-3807
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K700003 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.1150 INCHES MINIMUM AND 3.1350 INCHES MAXIMUM IN
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.1150 INCHES MINIMUM AND 3.1350 INCHES MAXIMUM IN
RETAINER FABRICATION METHODPRESSED
OVERALL HEIGHT0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
OPALInterchangeable
interchangeable cross-reference
interchangeable
12Z317-38Interchangeable
interchangeable cross-reference
interchangeable
D42Interchangeable
interchangeable cross-reference
interchangeable
AN872-1Interchangeable
interchangeable cross-reference
interchangeable
A-2345Interchangeable
interchangeable cross-reference
interchangeable
S1187Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy K700003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K700003?
K700003 is a BEARING,BALL,THRUST.
What parts can replace K700003?
There are 24 known substitutes for K700003: OPAL, 12Z317-38, D42 and 21 more. Substitute compatibility should be verified for your specific system.
Is K700003 still available?
K700003 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K700003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026