PartsTable
Technical Data Sheet
Download PDF

K6960 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

K6960: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.6875 INCHES NOMINAL IN, body_width: 2.320 INCHES MAXIMUM IN, cone_width: 0.9550 INCHES NOMINAL IN, body_height: 1.590 INCHES MAXIMUM IN, body_length: 2.840 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-5806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K6960
NSN: 3110-00-100-5806
NIINs: 001005806, 010447574
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 66821 — YALE SECURITY INC. DBA NORTON DOOR CONTROL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.6875 INCHES NOMINAL IN
body_width2.320 INCHES MAXIMUM IN
cone_width0.9550 INCHES NOMINAL IN
body_height1.590 INCHES MAXIMUM IN
body_length2.840 INCHES MAXIMUM IN
bore_diameter1.0000 INCHES NOMINAL IN
overall_width0.9688 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
standout_width0.2813 INCHES NOMINAL IN
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating320.0 HERTZ MINIMUM AND 480.0 HERTZ MAXIMUM SINGLE COMPONENT
NSN3110-00-100-5806
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K6960 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.6875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, STEEP ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.8593 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2813 INCHES NOMINAL IN
•
CONE WIDTH: 0.9550 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH0.6875 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, STEEP ANGLE
OVERALL WIDTH0.9688 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.8593 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
CONE CORNER RADIUS0.0930 INCHES NOMINAL IN
STANDOUT WIDTH0.2813 INCHES NOMINAL IN
CONE WIDTH0.9550 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.0000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
41100-41286Reference document
Same NSN cross-reference
Reference document — Secondary reference
245553Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy K6960?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K6960?
K6960 is a BEARING,ROLLER,TAPERED.
What parts can replace K6960?
There are 2 known substitutes for K6960: 41100-41286, 245553. Substitute compatibility should be verified for your specific system.
What is the NSN for K6960?
K6960 is cataloged in the U.S. Government catalog under NSN 3110-00-100-5806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K6960

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.