PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K587
K587 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include height: 0.203 INCHES NOMINAL IN, diameter: 0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN, material: STEEL COMP 1010 OVERALL, head_style: FLAT CHAMFER, shaft_type: ROUND SINGLE ACTUATOR, shaft_length: 0.750 INCHES NOMINAL SINGLE ACTUATOR IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4460, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K587
NSN: 5315-00-276-4460
FSC: 5315
CAGE: 30798 — AMCA INTL CORP INSLEY MFG CORP DIV (USA)
SPECIFICATIONS
height0.203 INCHES NOMINAL IN
diameter0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OVERALL
head_styleFLAT CHAMFER
shaft_typeROUND SINGLE ACTUATOR
shaft_length0.750 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
pole_quantity1 EACH SECTION REAR
terminal_typeTAB, SOLDER LUG
thread_length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
chamfer_length0.141 INCHES NOMINAL IN
overall_length2.749 INCHES NOMINAL IN
NSN5315-00-276-4460
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: K587 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
•
CHAMFER LENGTH: 0.141 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
FIRST HOLE DIAMETER: 0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
CHAMFER LENGTH0.141 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
FIRST HOLE DIAMETER0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEONE END DRILLED
SPECIAL FEATURESWITH COTTER PIN
HEIGHT0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
0539-5Interchangeable
interchangeable cross-reference
interchangeable
039549Interchangeable
interchangeable cross-reference
interchangeable
10670724-2Interchangeable
interchangeable cross-reference
interchangeable
30Interchangeable
interchangeable cross-reference
interchangeable
COUPLER,RH ITEMInterchangeable
interchangeable cross-reference
interchangeable
C50Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy K587?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K587?
K587 is a SWITCH,ROTARY.
What parts can replace K587?
There are 25 known substitutes for K587: 0539-5, 039549, 10670724-2 and 22 more. Substitute compatibility should be verified for your specific system.
Is K587 still available?
K587 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K587

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026