PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K5565
K5565 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.7230 INCHES NOMINAL IN, scale_type: DIAL, bore_diameter: 2.0000 INCHES NOMINAL IN, special_features: BACK OR BOTTOM MOUNTED WITH 0.5 IN. N.P.T.

MALE UNION CONNECTION IN, style_designator: NORMAL ANGLE. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3094, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K5565
NSN: 3110-00-100-3094
FSC: 3110
CAGE: F0272 — SKF FRANCE (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.7230 INCHES NOMINAL IN
scale_typeDIAL
bore_diameter2.0000 INCHES NOMINAL IN
special_featuresBACK OR BOTTOM MOUNTED WITH 0.5 IN. N.P.T. MALE UNION CONNECTION IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0469 INCHES NOMINAL IN
flexible_tube_length72.000 INCHES NOMINAL IN
indicator_connection_methodFLEXIBLE TUBE
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3094
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K5565 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0469 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 1.7230 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.0000 INCHES NOMINAL IN
CONE CORNER RADIUS0.0469 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE WIDTH1.7230 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
5565Interchangeable
interchangeable cross-reference
interchangeable
11279Interchangeable
interchangeable cross-reference
interchangeable
MGFB.26KInterchangeable
interchangeable cross-reference
interchangeable
POLYFIBER G DWInterchangeable
interchangeable cross-reference
interchangeable
POLYCONTRAST RAPID G DWInterchangeable
interchangeable cross-reference
interchangeable
35-02912-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K5565?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K5565?
K5565 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace K5565?
There are 13 known substitutes for K5565: 5565, 11279, MGFB.26K and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K5565?
K5565 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K5565

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026