PartsTable
Technical Data Sheet
Download PDF

K5355 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

K5355: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 3.812 INCHES NOMINAL IN, aperture_diameter: 0.875 INCHES NOMINAL IN, bolt_circle_diameter: 2.688 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-986-4254, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K5355
NSN: 5330-00-986-4254
FSC: 5330 — Packing and Gasket Materials
CAGE: 42280 — GARDNER DENVER NASH LLC DBA GARDNER DENVER ENGINEERED PRODUCTS GROUP DIV GARDNER DENVER NASH (USA)
SPECIFICATIONS
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter3.812 INCHES NOMINAL IN
aperture_diameter0.875 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter2.688 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
NSN5330-00-986-4254
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K5355 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.812 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
BOLT CIRCLE DIAMETER: 2.688 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER3.812 INCHES NOMINAL IN
APERTURE DIAMETER0.875 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
BOLT CIRCLE DIAMETER2.688 INCHES NOMINAL IN
HOLE DIAMETER0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
K5355XRReference document
Same NSN cross-reference
Reference document — Design control — primary reference
BK-5355-XRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy K5355?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K5355?
K5355 is a GASKET.
What parts can replace K5355?
There are 2 known substitutes for K5355: K5355XR, BK-5355-XR. Substitute compatibility should be verified for your specific system.
What is the NSN for K5355?
K5355 is cataloged in the U.S. Government catalog under NSN 5330-00-986-4254. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K5355