PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K4874
K4874 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-343-6120, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K4874
NSN: 5330-00-343-6120
FSC: 5330
CAGE: 73165 — FEDERAL-MOGUL CORP FEL-PRO GASKET DIV (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-343-6120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K4874 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: CELLULOSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALCELLULOSE OVERALL
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
FFS85TYPE2STYLE10PInterchangeable
interchangeable cross-reference
interchangeable
181648Interchangeable
interchangeable cross-reference
interchangeable
CS9028Interchangeable
interchangeable cross-reference
interchangeable
5898Interchangeable
interchangeable cross-reference
interchangeable
10127834-1Interchangeable
interchangeable cross-reference
interchangeable
058982Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy K4874?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K4874?
K4874 is a O-RING.
What parts can replace K4874?
There are 25 known substitutes for K4874: FFS85TYPE2STYLE10P, 181648, CS9028 and 22 more. Substitute compatibility should be verified for your specific system.
Is K4874 still available?
K4874 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K4874

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026