PartsTable
Technical Data Sheet
Download PDF

K4871 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

K4871: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, special_features: 2 BOLT HOLES AT 0.750 INS., cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-119-4205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K4871
NSN: 5330-00-119-4205
FSC: 5330 — Packing and Gasket Materials
CAGE: 73165 — FEDERAL-MOGUL CORP FEL-PRO GASKET DIV (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
special_features2 BOLT HOLES AT 0.750 INS.
bolt_hole_quantity1
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-119-4205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K4871 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 1
•
MATERIAL: CELLULOSE OVERALL
•
HOLE DIAMETER: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY1
SPECIAL FEATURES2 BOLT HOLES AT 0.750 INS.
MATERIALCELLULOSE OVERALL
HOLE DIAMETER0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 4
18173AReference document
Same NSN cross-reference
Reference document — Secondary reference
62822Reference document
Same NSN cross-reference
Reference document — Secondary reference
5734Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HM18173ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy K4871?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K4871?
K4871 is a GASKET.
What parts can replace K4871?
There are 4 known substitutes for K4871: 18173A, 62822, 5734 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K4871?
K4871 is cataloged in the U.S. Government catalog under NSN 5330-00-119-4205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K4871