PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K414
K414 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 0.8750 INCHES NOMINAL IN, outside_diameter: 3.4843 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0312 INCHES NOMINAL IN, specification/standard_data: 58536-AA59649-204B MANUFACTURERS SPECIFICATION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0309, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K414
NSN: 3110-00-100-0309
FSC: 3110
CAGE: F0272 — SKF FRANCE (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.8750 INCHES NOMINAL IN
outside_diameter3.4843 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.0312 INCHES NOMINAL IN
specification/standard_data58536-AA59649-204B MANUFACTURERS SPECIFICATION
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0309
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K414 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 58536-AA59649-204B MANUFACTURERS SPECIFICATION
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 3.4843 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA58536-AA59649-204B MANUFACTURERS SPECIFICATION
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER3.4843 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0312 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
1304540Interchangeable
interchangeable cross-reference
interchangeable
723Interchangeable
interchangeable cross-reference
interchangeable
NF5HInterchangeable
interchangeable cross-reference
interchangeable
57411Interchangeable
interchangeable cross-reference
interchangeable
FFB571TYPEAInterchangeable
interchangeable cross-reference
interchangeable
K420Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy K414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K414?
K414 is a CUP,TAPERED ROLLER BEARING.
What parts can replace K414?
There are 29 known substitutes for K414: 1304540, 723, NF5H and 26 more. Substitute compatibility should be verified for your specific system.
Is K414 still available?
K414 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K414

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026