PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K4-76-17

K4-76-17 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 1.3358 INCHES MINIMUM AND 1.3458 INCHES MAXIMUM IN, center_hole_diameter: 1.010 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN, cross-sectional_height: 0.281 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5330-00-528-2858, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K4-76-17
NSN: 5330-00-528-2858
FSC: 5330
CAGE: 72447 — DANA COMMERCIAL VEHICLE MANUFACTURING, LLC DBA DANA COMMERCIAL VEHICLE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter1.3358 INCHES MINIMUM AND 1.3458 INCHES MAXIMUM IN
center_hole_diameter1.010 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
cross-sectional_height0.281 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-00-528-2858
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K4-76-17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
CENTER HOLE DIAMETER: 1.010 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.3358 INCHES MINIMUM AND 1.3458 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OVERALL
CROSS-SECTIONAL SHAPE STYLEU
CENTER HOLE DIAMETER1.010 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.3358 INCHES MINIMUM AND 1.3458 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.281 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MT897AQS4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A7840-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6525-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
452322C1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
201929InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
27997InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy K4-76-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K4-76-17?
K4-76-17 is a RETAINER,PACKING.
What parts can replace K4-76-17?
There are 19 known substitutes for K4-76-17: MT897AQS4, A7840-1, 6525-1 and 16 more. Substitute compatibility should be verified for your specific system.
Is K4-76-17 still available?
K4-76-17 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K4-76-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026