PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K4-32
K4-32 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FERRULE,METALLIC SHIELDED CABLE,. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.8750 INCHES NOMINAL IN, inside_diameter: 0.500 INCHES NOMINAL IN, outside_diameter: 1.500 INCHES NOMINAL IN, special_features: AXIAL DISTANCE BETWEEN CENTER OF CUP CONTACT LINE AND BEARING STABILITY POINT ON SHAFT AXIS 0.3600 IN. IN, style_designator: ROUND, FLAT.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0311, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K4-32
NSN: 3110-00-100-0311
FSC: 3110
CAGE: F0272 — SKF FRANCE (FRA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.8750 INCHES NOMINAL IN
inside_diameter0.500 INCHES NOMINAL IN
outside_diameter1.500 INCHES NOMINAL IN
special_featuresAXIAL DISTANCE BETWEEN CENTER OF CUP CONTACT LINE AND BEARING STABILITY POINT ON SHAFT AXIS 0.3600 IN. IN
style_designatorROUND, FLAT
backface_corner_radius0.0938 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
general_characteristics_item_descriptionDESIGNED TO CUT BLANK KEYS BY BEST LOCK CORP CODES
NSN3110-00-100-0311
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K4-32 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0938 INCHES NOMINAL IN
OVERALL WIDTH0.8750 INCHES NOMINAL IN
OUTSIDE DIAMETER3.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF CUP CONTACT LINE AND BEARING STABILITY POINT ON SHAFT AXIS 0.3600 IN. IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
A3107Interchangeable
interchangeable cross-reference
interchangeable
210062Interchangeable
interchangeable cross-reference
interchangeable
C62106XInterchangeable
interchangeable cross-reference
interchangeable
11-7302Interchangeable
interchangeable cross-reference
interchangeable
CR77051PC190Interchangeable
interchangeable cross-reference
interchangeable
55543Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K4-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K4-32?
K4-32 is a FERRULE,METALLIC SHIELDED CABLE,.
What parts can replace K4-32?
There are 29 known substitutes for K4-32: A3107, 210062, C62106X and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K4-32?
K4-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K4-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026