PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K34F
K34F ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 19.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K34F
NSN: 3110-00-155-6672
FSC: 3110
CAGE: 09136 — BAY CITY SHOVELS, INC (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width19.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6672
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K34F · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OUTER RING
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SHIELD QUANTITY: 2
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OUTER RING
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY2
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
1607XInterchangeable
interchangeable cross-reference
interchangeable
AA59589-207JABTInterchangeable
interchangeable cross-reference
interchangeable
A-A-59589Interchangeable
interchangeable cross-reference
interchangeable
543426Interchangeable
interchangeable cross-reference
interchangeable
1314X1Interchangeable
interchangeable cross-reference
interchangeable
315ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K34F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K34F?
K34F is a BEARING,BALL,ANNULAR.
What parts can replace K34F?
There are 34 known substitutes for K34F: 1607X, AA59589-207JABT, A-A-59589 and 31 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K34F?
K34F is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K34F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026