PartsTable / COMPONENT / K2527
K2527
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, housing_bore_diameter: 3.623 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9875, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
K2527
NSN: 5330-00-171-9875 FSC: 5330 CAGE: 30798 — AMCA INTL CORP INSLEY MFG CORP DIV (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN housing_bore_diameter 3.623 INCHES NOMINAL IN sealing_element_style ANGULAR maximum_pressure_rating 7.0 POUNDS PER SQUARE INCH (PSI) LBS accommodated_shaft_diameter 2.625 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-171-9875
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: K2527
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 2.625 INCHES NOMINAL IN HOUSING BORE DIAMETER 3.623 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS SEAL WIDTH 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
4284 Interchangeable interchangeable cross-reference
interchangeable
49168 Interchangeable interchangeable cross-reference
interchangeable
300308315 Interchangeable interchangeable cross-reference
interchangeable
62L5 Interchangeable interchangeable cross-reference
interchangeable
26215 Interchangeable interchangeable cross-reference
interchangeable
L1206 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy K2527?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K2527?
K2527 is a SEAL,PLAIN ENCASED.
What parts can replace K2527?
There are 29 known substitutes for K2527: 4284, 49168, 300308315 and 26 more. Substitute compatibility should be verified for your specific system.
Is K2527 still available?
K2527 is currently cancelled.