PartsTable
Technical Data Sheet
Download PDF

K242-4 — VALVE,LINEAR,DIRECTIONAL CONTROL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

K242-4: VALVE,LINEAR,DIRECTIONAL CONTROL.

VALVE,LINEAR,DIRECTIONAL CONTROL. Key specifications include material: STEEL OVERALL, body_style: WEBBED, OFFSET, SOLID, bore_style: W/ KEYWAY BOTH ENDS, teeth_type: SINGLE HELIX, tooth_form: STANDARD, helix_angle: 23.2158 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-275-1012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K242-4
NSN: 3020-00-275-1012
NIINs: 002751012, 012752517
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 77605 — REPUBLIC GEAR CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleWEBBED, OFFSET, SOLID
bore_styleW/ KEYWAY BOTH ENDS
teeth_typeSINGLE HELIX
tooth_formSTANDARD
helix_angle23.2158 DEGREES
pitch_diameter5.6666 INCHES NOMINAL IN
pressure_angle18.3667 DEGREES
teeth_quantity40
hardness_rating58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM TEETH
tooth_directionRIGHT
style_designatorCONE SHAPE BODY, PROTRUDING HUB, RECESSED HUB
NSN3020-00-275-1012
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available VALVE,LINEAR,DIRECTIONAL CONTROL TITLE COMPONENT PN K242-4 MFR VALVE,LINEAR,DIRECTION
KEY FEATURES
•
KEYWAY NOMINAL WIDTH: 0.314 INCHES BOTH ENDS IN
•
BORE NOMINAL DIAMETER: 1.749 INCHES BOTH ENDS IN
•
HELIX ANGLE: 23.2158 DEGREES
•
HUB NOMINAL DIAMETER: 2.313 INCHES FIRST END IN
•
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END: 1.109 INCHES FIRST END IN
•
TEETH QUANTITY: 40
•
BODY STYLE: WEBBED, OFFSET, SOLID
TECHNICAL CHARACTERISTICS
KEYWAY NOMINAL WIDTH0.314 INCHES BOTH ENDS IN
BORE NOMINAL DIAMETER1.749 INCHES BOTH ENDS IN
HELIX ANGLE23.2158 DEGREES
HUB NOMINAL DIAMETER2.313 INCHES FIRST END IN
HUB NOMINAL DIAMETER2.313 INCHES SECOND END IN
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END1.109 INCHES FIRST END IN
TEETH QUANTITY40
BODY STYLEWEBBED, OFFSET, SOLID
TOOTH DIRECTIONRIGHT
BORE STYLEW/ KEYWAY BOTH ENDS
SUBSTITUTES & CROSS-REFERENCES 8
P18241Reference document
Same NSN cross-reference
Reference document — Secondary reference
4652Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
55944R1Reference document
Same NSN cross-reference
Reference document — Secondary reference
TS260-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
WT214-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
201067Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy K242-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K242-4?
K242-4 is a VALVE,LINEAR,DIRECTIONAL CONTROL.
What parts can replace K242-4?
There are 8 known substitutes for K242-4: P18241, 4652, 55944R1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K242-4?
K242-4 is cataloged in the U.S. Government catalog under NSN 3020-00-275-1012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K242-4