PartsTable
Technical Data Sheet
Download PDF

K1975 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

K1975: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.7620 INCHES NOMINAL IN, bore_diameter: 0.8750 INCHES NOMINAL IN, special_features: 2 TUBE DC TO AC INVERTER; 3.5 - 5.5VDC VDC, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-808-2993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K1975
NSN: 3110-00-808-2993
NIINs: 008082993, 015065543
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: F0272 — SKF FRANCE (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.7620 INCHES NOMINAL IN
bore_diameter0.8750 INCHES NOMINAL IN
special_features2 TUBE DC TO AC INVERTER; 3.5 - 5.5VDC VDC
style_designatorNORMAL ANGLE
cone_corner_radius0.0310 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-808-2993
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K1975 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
CONE WIDTH: 0.7620 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 0.8750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE WIDTH0.7620 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER0.8750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
20005PL FI D NO. 17Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1975Reference document
Same NSN cross-reference
Reference document — Secondary reference
89056Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
F103123Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-187Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy K1975?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K1975?
K1975 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace K1975?
There are 5 known substitutes for K1975: 20005PL FI D NO. 17, 1975, 89056 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K1975?
K1975 is cataloged in the U.S. Government catalog under NSN 3110-00-808-2993. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K1975