PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K11109C
K11109C ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 70.00 MILLIMETERS NOMINAL MM, overall_width: 1.5625 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K11109C
NSN: 3110-00-156-7952
FSC: 3110
CAGE: 66821 — YALE SECURITY INC. DBA NORTON DOOR CONTROL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter70.00 MILLIMETERS NOMINAL MM
overall_width1.5625 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity2
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter125.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-156-7952
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K11109C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 70.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 125.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER70.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER125.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
INTERNAL FIT-UP DESIGNATIONSTANDARD
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
G-12Interchangeable
interchangeable cross-reference
interchangeable
15422Interchangeable
interchangeable cross-reference
interchangeable
S134Interchangeable
interchangeable cross-reference
interchangeable
1921235Interchangeable
interchangeable cross-reference
interchangeable
945789Interchangeable
interchangeable cross-reference
interchangeable
1877806Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K11109C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K11109C?
K11109C is a BEARING,BALL,ANNULAR.
What parts can replace K11109C?
There are 11 known substitutes for K11109C: G-12, 15422, S134 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K11109C?
K11109C is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K11109C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026