PartsTable
Technical Data Sheet
Download PDF

K1091A-11.034482MHZ — OSCILLATOR,CRYSTAL CONTROLLED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

K1091A-11.034482MHZ: OSCILLATOR,CRYSTAL CONTROLLED.

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, temp_rating: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF, control_type: REMOTE, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.470 INCHES NOMINAL IN, aperture_width: 4.320 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-427-4479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K1091A-11.034482MHZ
NSN: 5330-00-427-4479
NIINs: 004274479, 010102803
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
temp_rating-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
control_typeREMOTE
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.470 INCHES NOMINAL IN
aperture_width4.320 INCHES NOMINAL IN
inclosure_typeENCASED
overall_height0.565 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
aperture_length10.400 INCHES NOMINAL IN
connection_typePIN BOTTOM
hardness_rating50.0 SHORE DUROMETER A NOMINAL OVERALL
NSN5330-00-427-4479
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K1091A-11.034482MHZ MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH11.560 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH5.560 INCHES NOMINAL IN
APERTURE WIDTH4.320 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.180 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
442026Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy K1091A-11.034482MHZ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K1091A-11.034482MHZ?
K1091A-11.034482MHZ is a OSCILLATOR,CRYSTAL CONTROLLED.
What parts can replace K1091A-11.034482MHZ?
There is 1 known substitute for K1091A-11.034482MHZ: 442026. Substitute compatibility should be verified for your specific system.
What is the NSN for K1091A-11.034482MHZ?
K1091A-11.034482MHZ is cataloged in the U.S. Government catalog under NSN 5330-00-427-4479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K1091A-11.034482MHZ

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.