K05-217SSHT1 — CLAMP,BLOCK

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

K05-217SSHT1: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN, special_features: LOOP CUSHIONED, GENERAL PURPOSE SILICONE PER AMS-3303, 125PSI MIN TEAR,, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S), clamping_hole_diameter: 4.125 INCHES NOMINAL SINGLE HOLE IN, mounting_hole_diameter: 0.204 INCHES NOMINAL0.204 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-692-0432, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

K05-217SSHT1

NSN: 5340-01-692-0432
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING
overall_width	0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
special_features	LOOP CUSHIONED, GENERAL PURPOSE SILICONE PER AMS-3303, 125PSI MIN TEAR,
mounting_facility	UNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter	4.125 INCHES NOMINAL SINGLE HOLE IN
mounting_hole_diameter	0.204 INCHES NOMINAL0.204 INCHES NOMINAL IN
mounting_hole_quantity	22
part_name_assigned_by_controlling_agency	SADDLE TYPE CLAMP,
distance_from_center_of_mounting_hole_to_edge_along_the_width	2.175 INCHES NOMINAL2.175 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_mounting_holes	4.830 INCHES NOMINAL4.830 INCHES NOMINAL IN
NSN	5340-01-692-0432

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING HOLE QUANTITY: 22

•

MOUNTING HOLE DIAMETER: 0.204 INCHES NOMINAL0.204 INCHES NOMINAL IN

•

CLAMPING HOLE DIAMETER: 4.125 INCHES NOMINAL SINGLE HOLE IN

•

DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH: 2.175 INCHES NOMINAL2.175 INCHES NOMINAL IN

•

MOUNTING FACILITY: UNTHREADED HOLE(S)UNTHREADED HOLE(S)

•

CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES: 4.830 INCHES NOMINAL4.830 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

MOUNTING HOLE QUANTITY	22
MOUNTING HOLE DIAMETER	0.204 INCHES NOMINAL0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER	4.125 INCHES NOMINAL SINGLE HOLE IN
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	2.175 INCHES NOMINAL2.175 INCHES NOMINAL IN
MOUNTING FACILITY	UNTHREADED HOLE(S)UNTHREADED HOLE(S)
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES	4.830 INCHES NOMINAL4.830 INCHES NOMINAL IN
SPECIAL FEATURES	LOOP CUSHIONED, GENERAL PURPOSE SILICONE PER AMS-3303, 125PSI MIN TEAR,
PART NAME ASSIGNED BY CONTROLLING AGENCY	SADDLE TYPE CLAMP,
MATERIAL	STEEL CORROSION RESISTING

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy K05-217SSHT1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is K05-217SSHT1?

K05-217SSHT1 is a CLAMP,BLOCK.

What is the NSN for K05-217SSHT1?

K05-217SSHT1 is cataloged in the U.S. Government catalog under NSN 5340-01-692-0432. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

K05-217SSHT1 — CLAMP,BLOCK

Request a Quote — K05-217SSHT1