PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K.101022.000-2
K.101022.000-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The K.101022.000-2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-818-0558, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K.101022.000-2
NSN: 5330-00-818-0558
FSC: 5330
CAGE: A3JLJ
SPECIFICATIONS
Part NumberK.101022.000-2
NSN5330-00-818-0558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K.101022.000-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 5.773 INCHES MINIMUM AND 5.777 INCHES MAXIMUM IN
•
CONSTRUCTION: SOLID
•
CRITICALITY CODE JUSTIFICATION: ABVM AND CPCW
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
SEAL WIDTH: 0.366 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC PHENOLIC BACKING
•
HOUSING BORE DIAMETER: 6.251 INCHES MINIMUM AND 6.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER5.773 INCHES MINIMUM AND 5.777 INCHES MAXIMUM IN
CONSTRUCTIONSOLID
CRITICALITY CODE JUSTIFICATIONABVM AND CPCW
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
SEAL WIDTH0.366 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
MATERIALPLASTIC PHENOLIC BACKING
HOUSING BORE DIAMETER6.251 INCHES MINIMUM AND 6.255 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
SL5989PC342Interchangeable
interchangeable cross-reference
interchangeable
811-1Interchangeable
interchangeable cross-reference
interchangeable
SL4980PC342Interchangeable
interchangeable cross-reference
interchangeable
6210002952311Interchangeable
interchangeable cross-reference
interchangeable
8-0111-200Interchangeable
interchangeable cross-reference
interchangeable
8-111N300-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K.101022.000-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K.101022.000-2?
K.101022.000-2 is a K.101022.000-2.
What parts can replace K.101022.000-2?
There are 24 known substitutes for K.101022.000-2: SL5989PC342, 811-1, SL4980PC342 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K.101022.000-2?
K.101022.000-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-818-0558. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K.101022.000-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026