PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K-SWV 12LR
K-SWV 12LR ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

CONNECTOR,MULTIPLE,FLUID PRESSUR. Key specifications include material: STEEL CORROSION RESISTING BODY, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, control_type: REMOTE, flute_length: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-303-1142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-SWV 12LR
NSN: 4730-01-303-1142
FSC: 4730
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BODY
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
control_typeREMOTE
flute_length2.750 INCHES NOMINAL IN
thread_class3A ALL ENDS A
overall_width1.950 INCHES NOMINAL IN
flute_quantity2
inclosure_typeENCASED
overall_height0.290 INCHES NOMINAL IN
overall_length2.620 INCHES NOMINAL IN
NSN4730-01-303-1142
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: K-SWV 12LR · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2001 BInterchangeable
interchangeable cross-reference
interchangeable
150 BInterchangeable
interchangeable cross-reference
interchangeable
44172Interchangeable
interchangeable cross-reference
interchangeable
11447Interchangeable
interchangeable cross-reference
interchangeable
AN1Interchangeable
interchangeable cross-reference
interchangeable
B16.22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K-SWV 12LR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-SWV 12LR?
K-SWV 12LR is a CONNECTOR,MULTIPLE,FLUID PRESSUR.
What parts can replace K-SWV 12LR?
There are 9 known substitutes for K-SWV 12LR: 2001 B, 150 B, 44172 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K-SWV 12LR?
K-SWV 12LR is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-303-1142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-SWV 12LR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026