PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K-5150235
K-5150235 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.375 INCHES NOMINAL IN, overall_length: 12.312 INCHES NOMINAL IN, outside_corner_radius: 0.938 INCHES NOMINAL IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-212-6321, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-5150235
NSN: 5330-00-212-6321
FSC: 5330
CAGE: 18954 — KORODY-COLYER CORP A CR INDUSTRIES CO (USA)
SPECIFICATIONS
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.375 INCHES NOMINAL IN
overall_length12.312 INCHES NOMINAL IN
outside_corner_radius0.938 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-212-6321
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K-5150235 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.938 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH12.312 INCHES NOMINAL IN
HOLE DIAMETER0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE CORNER RADIUS0.938 INCHES NOMINAL IN
OVERALL WIDTH7.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
182395Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
QQA200-11Interchangeable
interchangeable cross-reference
interchangeable
28505Interchangeable
interchangeable cross-reference
interchangeable
176047Interchangeable
interchangeable cross-reference
interchangeable
2131815-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy K-5150235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-5150235?
K-5150235 is a GASKET.
What parts can replace K-5150235?
There are 11 known substitutes for K-5150235: 182395, AMS-QQ-A-200/11, QQA200-11 and 8 more. Substitute compatibility should be verified for your specific system.
Is K-5150235 still available?
K-5150235 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-5150235

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026