PartsTable
Technical Data Sheet
Download PDF

K-500-F-4021 — PLUG,FUSIBLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

K-500-F-4021: PLUG,FUSIBLE.

The PLUG,FUSIBLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASING, usage_location: OUTSIDE, size_designation: 2 INCH IN, features_provided: CORE, core_fusing_temp_rating: 250.0 DEG FAHRENHEIT, material_document_and_classification: COMP 316 NATIONAL SPEC SINGLE MATERIAL RESPONSE CASING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-121-8779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-500-F-4021
NSN: 5340-01-121-8779
FSC: 5340 — Hardware, Commercial
CAGE: 59556 — KOVATCH CORP. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASING
usage_locationOUTSIDE
size_designation2 INCH IN
features_providedCORE
core_fusing_temp_rating250.0 DEG FAHRENHEIT
material_document_and_classificationCOMP 316 NATIONAL SPEC SINGLE MATERIAL RESPONSE CASING
thread_size_and_series/type_designator2-11 1/2 NPT
NSN5340-01-121-8779
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K-500-F-4021 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 316 NATIONAL SPEC SINGLE MATERIAL RESPONSE CASING
•
FEATURES PROVIDED: CORE
•
SIZE DESIGNATION: 2 INCH IN
•
CORE FUSING TEMP RATING: 250.0 DEG FAHRENHEIT
•
MATERIAL: STEEL CORROSION RESISTING CASING
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 2-11 1/2 NPT
•
USAGE LOCATION: OUTSIDE
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP 316 NATIONAL SPEC SINGLE MATERIAL RESPONSE CASING
FEATURES PROVIDEDCORE
SIZE DESIGNATION2 INCH IN
CORE FUSING TEMP RATING250.0 DEG FAHRENHEIT
MATERIALSTEEL CORROSION RESISTING CASING
THREAD SIZE AND SERIES/TYPE DESIGNATOR2-11 1/2 NPT
USAGE LOCATIONOUTSIDE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
T-3322-SSReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy K-500-F-4021?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-500-F-4021?
K-500-F-4021 is a PLUG,FUSIBLE.
What parts can replace K-500-F-4021?
There is 1 known substitute for K-500-F-4021: T-3322-SS. Substitute compatibility should be verified for your specific system.
What is the NSN for K-500-F-4021?
K-500-F-4021 is cataloged in the U.S. Government catalog under NSN 5340-01-121-8779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-500-F-4021