PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K-500-CH-0267
K-500-CH-0267 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 1.3750 INCHES NOMINAL IN, outside_diameter: 5.3438 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.1250 INCHES NOMINAL IN, end_item_identification: MRAP BUFFALO MK2A2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-500-CH-0267
NSN: 3110-00-100-0500
FSC: 3110
CAGE: 59556 — KOVATCH CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width1.3750 INCHES NOMINAL IN
outside_diameter5.3438 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.1250 INCHES NOMINAL IN
end_item_identificationMRAP BUFFALO MK2A2
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0500
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K-500-CH-0267 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 5.3438 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH1.3750 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER5.3438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
5735Interchangeable
IBM 8GB Dual Port Pcie Fiber Channel
interchangeable
417-6700-1193028Interchangeable
interchangeable cross-reference
interchangeable
564-6700-936259PCR3S3U3X3Interchangeable
interchangeable cross-reference
interchangeable
417-6700-1193028PCSR3S3U3X3Interchangeable
interchangeable cross-reference
interchangeable
33-156Interchangeable
interchangeable cross-reference
interchangeable
16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K-500-CH-0267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-500-CH-0267?
K-500-CH-0267 is a CUP,TAPERED ROLLER BEARING.
What parts can replace K-500-CH-0267?
There are 23 known substitutes for K-500-CH-0267: 5735, 417-6700-1193028, 564-6700-936259PCR3S3U3X3 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K-500-CH-0267?
K-500-CH-0267 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-500-CH-0267

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026