PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K-5-36
K-5-36 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: RUBBER SYNTHETIC OVERALL, thickness: 0.062 INCHES NOMINAL IN, cone_width: 1.4550 INCHES NOMINAL IN, bulb_length: 4.438 INCHES NOMINAL IN, bore_diameter: 1.8750 INCHES NOMINAL IN, bulb_diameter: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-5-36
NSN: 3110-00-100-0273
FSC: 3110
CAGE: F0272 — SKF FRANCE (FRA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
thickness0.062 INCHES NOMINAL IN
cone_width1.4550 INCHES NOMINAL IN
bulb_length4.438 INCHES NOMINAL IN
bore_diameter1.8750 INCHES NOMINAL IN
bulb_diameter0.375 INCHES NOMINAL IN
hole_diameter0.375 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
mounting_methodBRACKET(S)
overall_diameter0.562 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
precious_materialSILVER
NSN3110-00-100-0273
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K-5-36 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 1.4550 INCHES NOMINAL IN
•
BORE DIAMETER: 1.8750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.4550 INCHES NOMINAL IN
BORE DIAMETER1.8750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
66816Interchangeable
interchangeable cross-reference
interchangeable
37482Interchangeable
interchangeable cross-reference
interchangeable
519BInterchangeable
interchangeable cross-reference
interchangeable
2261-93PCE3Interchangeable
interchangeable cross-reference
interchangeable
30051Interchangeable
interchangeable cross-reference
interchangeable
995-262Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K-5-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-5-36?
K-5-36 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace K-5-36?
There are 26 known substitutes for K-5-36: 66816, 37482, 519B and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K-5-36?
K-5-36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-5-36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026