PartsTable
Technical Data Sheet
Download PDF

K-1000-3 — TOOL KIT,METAL WORKER'S

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

K-1000-3: TOOL KIT,METAL WORKER'S.

The TOOL KIT,METAL WORKER'S is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.220 INCHES NOMINAL IN, nut_length: 0.948 INCHES NOMINAL IN, plate_width: 0.328 INCHES NOMINAL IN, temp_rating: 550.0 FAHRENHEIT NOMINAL DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-802-9533, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-1000-3
NSN: 5310-00-802-9533
NIINs: 008029533, 015857544
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.220 INCHES NOMINAL IN
nut_length0.948 INCHES NOMINAL IN
plate_width0.328 INCHES NOMINAL IN
temp_rating550.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
locking_featureFREE-RUNNING ALL METAL DESIGN
plate_thickness0.032 INCHES NOMINAL IN
special_featuresSHEET METAL FASTENER INSTALLATION KIT IS EQUIPPED WITH EVERYTHING NEEDED TO INSTALL MOST ALL SINGLE ACTION BLIND FASTENERS UP TO 1/4 IN. DIA.; 30 PIECE IN
thread_directionRIGHT-HAND
NSN5310-00-802-9533
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: K-1000-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.032 INCHES NOMINAL IN
•
NUT LENGTH: 0.948 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.328 INCHES NOMINAL IN
•
TEMP RATING: 550.0 FAHRENHEIT NOMINAL DEGF
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.032 INCHES NOMINAL IN
NUT LENGTH0.948 INCHES NOMINAL IN
THREAD SERIESUNF
PLATE WIDTH0.328 INCHES NOMINAL IN
TEMP RATING550.0 FAHRENHEIT NOMINAL DEGF
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.344 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
K1000-1032Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy K-1000-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-1000-3?
K-1000-3 is a TOOL KIT,METAL WORKER'S.
What parts can replace K-1000-3?
There is 1 known substitute for K-1000-3: K1000-1032. Substitute compatibility should be verified for your specific system.
What is the NSN for K-1000-3?
K-1000-3 is cataloged in the U.S. Government catalog under NSN 5310-00-802-9533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-1000-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.