PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K-10
K-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include phase: SINGLE, shape: RECTANGULAR, height: 13.250 INCHES NOMINAL IN, length: 9.000 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, thickness: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-197-8105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K-10
NSN: 5340-00-197-8105
FSC: 5340
CAGE: 95760 — PROTECTIVE CLOSURES CO INC (USA)
SPECIFICATIONS
phaseSINGLE
shapeRECTANGULAR
height13.250 INCHES NOMINAL IN
length9.000 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
thickness0.312 INCHES NOMINAL IN
drive_typeBELT
design_typeNONREUSABLE
temp_rating-40.0 FAHRENHEIT MINIMUM AND 250.0 FAHRENHEIT MAXIMUM DEGF
inside_depth15.0 INCHES NOMINAL IN
inside_width3.0 INCHES NOMINAL IN
air_flow_rate115.0 CUBIC FEET PER MINUTE MINIMUM AND 700.0 CUBIC FEET PER MINUTE MAXIMUM
NSN5340-00-197-8105
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: K-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
FEATURES PROVIDED: BEVELED SEAT AND SHOULDER
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.588 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.620 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC, POLYETHYLENE (PP)
FEATURES PROVIDEDBEVELED SEAT AND SHOULDER
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.588 INCHES NOMINAL IN
OVERALL DIAMETER0.620 INCHES NOMINAL IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
K10Interchangeable
interchangeable cross-reference
interchangeable
BS4-1513PC7Interchangeable
interchangeable cross-reference
interchangeable
212-59-6PC7Interchangeable
interchangeable cross-reference
interchangeable
212-58-01PC7Interchangeable
interchangeable cross-reference
interchangeable
417Interchangeable
interchangeable cross-reference
interchangeable
JS4099Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K-10?
K-10 is a CAPACITOR,VARIABLE,AIR DIELECTRI.
What parts can replace K-10?
There are 14 known substitutes for K-10: K10, BS4-1513PC7, 212-59-6PC7 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K-10?
K-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-197-8105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026