PartsTable
Technical Data Sheet
PartsTable / COMPONENT / K 147481
K 147481 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL OVERALL, special_features: METALLIC HARDNESS RATING ROCKWELL C MIN 62.0 IN. AND MAX 64.0 IN.

IN, style_designator: BALL, rolling_element_diameter: 0.1250 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR BALLS, GRADE 500. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-9129, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
K 147481
NSN: 3110-00-151-9129
FSC: 3110
CAGE: 18954 — KORODY-COLYER CORP A CR INDUSTRIES CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
special_featuresMETALLIC HARDNESS RATING ROCKWELL C MIN 62.0 IN. AND MAX 64.0 IN. IN
style_designatorBALL
rolling_element_diameter0.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR BALLS, GRADE 500
NSN3110-00-151-9129
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K 147481 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR BALLS, GRADE 500
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: BALL
TECHNICAL CHARACTERISTICS (FLIS)
ROLLING ELEMENT DIAMETER0.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR BALLS, GRADE 500
SPECIAL FEATURESMETALLIC HARDNESS RATING ROCKWELL C MIN 62.0 IN. AND MAX 64.0 IN. IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORBALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
115529Interchangeable
interchangeable cross-reference
interchangeable
05004-0022Interchangeable
interchangeable cross-reference
interchangeable
5133-18CInterchangeable
interchangeable cross-reference
interchangeable
1000-18BCInterchangeable
interchangeable cross-reference
interchangeable
500422Interchangeable
interchangeable cross-reference
interchangeable
7751500Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy K 147481?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K 147481?
K 147481 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace K 147481?
There are 9 known substitutes for K 147481: 115529, 05004-0022, 5133-18C and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K 147481?
K 147481 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-9129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K 147481

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026