PartsTable
Technical Data Sheet
PartsTable / O-RING / JV81-862,PC.9
JV81-862,PC.9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The JV81-862,PC.9 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-225-4200, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JV81-862,PC.9
NSN: 5331-01-225-4200
FSC: 5331 — O-RING
CAGE: 04845 — AUTOMATIC SWITCH COMPANY DBA ASCO (USA)
SPECIFICATIONS
Part NumberJV81-862,PC.9
NSN5331-01-225-4200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JV81-862,PC.9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
OUTSIDE DIAMETER: 0.379 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
ELONGATION PERCENTAGE160 MAXIMUM
OUTSIDE DIAMETER0.379 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
DEPARTURE FROM CITED DOCUMENTMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
V3D10254 ITEM 40CPInterchangeable
interchangeable cross-reference
interchangeable
B180-010Interchangeable
interchangeable cross-reference
interchangeable
0X58-010-15CPInterchangeable
interchangeable cross-reference
interchangeable
101-00500Interchangeable
interchangeable cross-reference
interchangeable
MS28775-010Interchangeable
interchangeable cross-reference
interchangeable
58-010-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JV81-862,PC.9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JV81-862,PC.9?
JV81-862,PC.9 is a JV81-862,PC.9.
What parts can replace JV81-862,PC.9?
There are 18 known substitutes for JV81-862,PC.9: V3D10254 ITEM 40CP, B180-010, 0X58-010-15CP and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JV81-862,PC.9?
JV81-862,PC.9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-225-4200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JV81-862,PC.9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026