PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JP20081P152
JP20081P152 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, overall_length: 5.100 INCHES MINIMUM AND 5.140 INCHES MAXIMUM IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-486-9405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JP20081P152
NSN: 5340-00-486-9405
FSC: 5340
CAGE: 00986 — CHROMALLOY GAS TURBINE LLC DIV CHROMALLOY CONNECTICUT (USA)
SPECIFICATIONS
cushionINCLUDED
materialSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
overall_length5.100 INCHES MINIMUM AND 5.140 INCHES MAXIMUM IN
style_designatorCURVED ARCH
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
mounting_hole_size0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
inside_diameter/arch_length3.230 INCHES MINIMUM AND 3.270 INCHES MAXIMUM IN
material_document_and_classificationA50TF118 CL-A 07482 MFR REF SINGLE MATERIAL RESPONSE CUSHIONING
distance_between_mounting_hole_centers4.500 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM IN
NSN5340-00-486-9405
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JP20081P152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PAD: NOT INCLUDED
•
CUSHION: INCLUDED
•
MATERIAL DOCUMENT AND CLASSIFICATION: A50TF118 CL-A 07482 MFR REF SINGLE MATERIAL RESPONSE CUSHIONING
•
STYLE DESIGNATOR: CURVED ARCH
•
INSIDE DIAMETER/ARCH LENGTH: 3.230 INCHES MINIMUM AND 3.270 INCHES MAXIMUM IN
•
MOUNTING HOLE SIZE: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
MATERIAL: ASBESTOS AND PLASTIC CUSHIONING
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH5.100 INCHES MINIMUM AND 5.140 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
CUSHIONINCLUDED
MATERIAL DOCUMENT AND CLASSIFICATIONA50TF118 CL-A 07482 MFR REF SINGLE MATERIAL RESPONSE CUSHIONING
STYLE DESIGNATORCURVED ARCH
INSIDE DIAMETER/ARCH LENGTH3.230 INCHES MINIMUM AND 3.270 INCHES MAXIMUM IN
MOUNTING HOLE SIZE0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
MATERIALASBESTOS AND PLASTIC CUSHIONING
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
95771Interchangeable
interchangeable cross-reference
interchangeable
96052Interchangeable
interchangeable cross-reference
interchangeable
3013466Interchangeable
interchangeable cross-reference
interchangeable
3011427Interchangeable
interchangeable cross-reference
interchangeable
96002Interchangeable
interchangeable cross-reference
interchangeable
9608M20P52Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JP20081P152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JP20081P152?
JP20081P152 is a STRAP,RETAINING.
What parts can replace JP20081P152?
There are 6 known substitutes for JP20081P152: 95771, 96052, 3013466 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JP20081P152?
JP20081P152 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-486-9405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JP20081P152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026