PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JP1914-8
JP1914-8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.125 INCHES NOMINAL IN, material: STEEL COMP 1008 OVERALL, style_designator: STANDARD, underloop_length: 1.500 INCHES NOMINAL IN, surface_treatment: CADMIUM OR ZINC OVERALL, nondefinitive_spec/std_data: B TYPE AND 2 CLASS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-013-7204, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JP1914-8
NSN: 5315-00-013-7204
FSC: 5315
CAGE: 29215 — JENNY PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.125 INCHES NOMINAL IN
materialSTEEL COMP 1008 OVERALL
style_designatorSTANDARD
underloop_length1.500 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC OVERALL
nondefinitive_spec/std_dataB TYPE AND 2 CLASS
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5315-00-013-7204
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: JP1914-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 2 CLASS
•
UNDERLOOP LENGTH: 1.500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1008 OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSTANDARD
NONDEFINITIVE SPEC/STD DATAB TYPE AND 2 CLASS
UNDERLOOP LENGTH1.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
DIAMETER0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1008 OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
5315PL1390659Interchangeable
interchangeable cross-reference
interchangeable
FFP386BTYPEAInterchangeable
interchangeable cross-reference
interchangeable
10118820Interchangeable
interchangeable cross-reference
interchangeable
13720-4Interchangeable
interchangeable cross-reference
interchangeable
J40-260-4Interchangeable
interchangeable cross-reference
interchangeable
7620133Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JP1914-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JP1914-8?
JP1914-8 is a PIN,COTTER.
What parts can replace JP1914-8?
There are 13 known substitutes for JP1914-8: 5315PL1390659, FFP386BTYPEA, 10118820 and 10 more. Substitute compatibility should be verified for your specific system.
Is JP1914-8 still available?
JP1914-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JP1914-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026