PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JP1228P1
JP1228P1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, loop_width: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, loop_length: 0.620 INCHES NOMINAL IN, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: MULTIPLE LOOP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-003-0208, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JP1228P1
NSN: 5340-01-003-0208
FSC: 5340
CAGE: 00986 — CHROMALLOY GAS TURBINE LLC DIV CHROMALLOY CONNECTICUT (USA)
SPECIFICATIONS
diameter0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
materialPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
loop_width0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
loop_length0.620 INCHES NOMINAL IN
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.578 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.620 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.360 INCHES NOMINAL IN
NSN5340-01-003-0208
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JP1228P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.360 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
LOOP LENGTH: 0.620 INCHES NOMINAL IN
•
DIAMETER: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.360 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
STYLE DESIGNATORMULTIPLE LOOP
MATERIALSTEEL COMP 321 BAND
LOOP LENGTH0.620 INCHES NOMINAL IN
DIAMETER0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
LOOP WIDTH0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10003Interchangeable
interchangeable cross-reference
interchangeable
CD4009UBK/3Interchangeable
interchangeable cross-reference
interchangeable
3100109-007-109Interchangeable
interchangeable cross-reference
interchangeable
B-82577Interchangeable
interchangeable cross-reference
interchangeable
10601Interchangeable
interchangeable cross-reference
interchangeable
10239AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JP1228P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JP1228P1?
JP1228P1 is a CLAMP,LOOP.
What parts can replace JP1228P1?
There are 9 known substitutes for JP1228P1: 10003, CD4009UBK/3, 3100109-007-109 and 6 more. Substitute compatibility should be verified for your specific system.
Is JP1228P1 still available?
JP1228P1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JP1228P1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026