PartsTable
Technical Data Sheet
Download PDF

JP0029SHR12 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JP0029SHR12: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: PLASTIC TETRAFLUOROETHYLENE CUSHION, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-561-7257, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JP0029SHR12
NSN: 5340-00-561-7257
FSC: 5340 — Hardware, Commercial
CAGE: 00986 — CHROMALLOY GAS TURBINE LLC DIV CHROMALLOY CONNECTICUT (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialPLASTIC TETRAFLUOROETHYLENE CUSHION
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
specification/standard_data81205-BACC10EP MANUFACTURERS SPECIFICATION
distance_from_loop_center_to_tongue_end1.053 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.840 INCHES MINIMUM AND 0.850 INCHES MAXIMUM IN
NSN5340-00-561-7257
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JP0029SHR12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.053 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 81205-BACC10EP MANUFACTURERS SPECIFICATION
•
SURFACE TREATMENT: PASSIVATE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.053 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA81205-BACC10EP MANUFACTURERS SPECIFICATION
SURFACE TREATMENTPASSIVATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.840 INCHES MINIMUM AND 0.850 INCHES MAXIMUM IN
MATERIALPLASTIC TETRAFLUOROETHYLENE CUSHION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 5
BACC10DD-C12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA9C18H12ARSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BACC10HS12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA9C18H12ATSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
463SS12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy JP0029SHR12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JP0029SHR12?
JP0029SHR12 is a CLAMP,LOOP.
What parts can replace JP0029SHR12?
There are 5 known substitutes for JP0029SHR12: BACC10DD-C12, TA9C18H12AR, BACC10HS12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JP0029SHR12?
JP0029SHR12 is cataloged in the U.S. Government catalog under NSN 5340-00-561-7257. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JP0029SHR12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.