JP/2-252-2 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

JP/2-252-2: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT, shaft_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-183-6661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ JP/2-252-2

NSN: 5905-01-183-6661
FSC: 5905 — Resistor
CAGE: 94603 — HONEYWELL SENSING & CONTROL (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
bearing_type	SLEEVE SHAFT
shaft_length	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
overall_length	0.751 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
shaft_diameter	0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
mounting_method	STANDARD BUSHING
overall_diameter	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
section_quantity	1
NSN	5905-01-183-6661

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 6.00 INCH-OUNCES IN

•

BODY DIAMETER: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 4.0 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES IN
BODY DIAMETER	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	4.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MOUNTING METHOD	STANDARD BUSHING

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

F0701805Reference document

Same NSN cross-reference

Reference document — Secondary reference

HS5291-2322Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JP/2-252-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JP/2-252-2?

JP/2-252-2 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace JP/2-252-2?

There are 2 known substitutes for JP/2-252-2: F0701805, HS5291-2322. Substitute compatibility should be verified for your specific system.

What is the NSN for JP/2-252-2?

JP/2-252-2 is cataloged in the U.S. Government catalog under NSN 5905-01-183-6661. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JP/2-252-2 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — JP/2-252-2