JM75LC6S8 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM75LC6S8: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, slot_width: 0.094 INCHES NOMINAL IN, slot_length: 0.406 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: OFFSET MOUNT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-336-2447, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM75LC6S8

NSN: 5340-01-336-2447
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.406 INCHES NOMINAL IN
material	RUBBER CHLOROPRENE CLASS CR CUSHION
slot_width	0.094 INCHES NOMINAL IN
slot_length	0.406 INCHES NOMINAL IN
overall_width	0.625 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	OBLONG AND ROUND, UNTHREADED
surface_treatment	CADMIUM BAND
material_thickness	0.030 INCHES NOMINAL IN
loop_inside_diameter	0.500 INCHES NOMINAL IN
cushioning_environmental_protection	WEATHER RESISTANT
material_document_and_classification	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
NSN	5340-01-336-2447

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.406 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN

•

SURFACE TREATMENT: CADMIUM BAND

•

TONGUE HOLE TYPE: OBLONG AND ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	WEATHER RESISTANT
STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.406 INCHES NOMINAL IN
OVERALL WIDTH	0.625 INCHES NOMINAL IN
MATERIAL THICKNESS	0.030 INCHES NOMINAL IN
SURFACE TREATMENT	CADMIUM BAND
TONGUE HOLE TYPE	OBLONG AND ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.744 INCHES MINIMUM AND 0.784 INCHES MAXIMUM IN
MATERIAL	STEEL BAND

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 3

S464-G8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S464G8 ZZReference document

Same NSN cross-reference

Reference document — Design control — primary reference

686CS8Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM75LC6S8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM75LC6S8?

JM75LC6S8 is a CLAMP,LOOP.

What parts can replace JM75LC6S8?

There are 3 known substitutes for JM75LC6S8: S464-G8, S464G8 ZZ, 686CS8. Substitute compatibility should be verified for your specific system.

What is the NSN for JM75LC6S8?

JM75LC6S8 is cataloged in the U.S. Government catalog under NSN 5340-01-336-2447. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM75LC6S8 — CLAMP,LOOP

Request a Quote — JM75LC6S8