PartsTable
Technical Data Sheet
Download PDF

JM719149 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

JM719149: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 34.0 MILLIMETERS NOMINAL MM, bore_diameter: 95.0 MILLIMETERS NOMINAL MM, special_features: DUTY CLASS JM SERIES, style_designator: NORMAL ANGLE, cone_corner_radius: 3.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-357-9710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM719149
NSN: 3110-00-357-9710
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 0LTL1 — NTN BEARING CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width34.0 MILLIMETERS NOMINAL MM
bore_diameter95.0 MILLIMETERS NOMINAL MM
special_featuresDUTY CLASS JM SERIES
style_designatorNORMAL ANGLE
cone_corner_radius3.0 MILLIMETERS NOMINAL MM
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-357-9710
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: JM719149 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 3.0 MILLIMETERS NOMINAL MM
•
CONE WIDTH: 34.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 95.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS3.0 MILLIMETERS NOMINAL MM
CONE WIDTH34.0 MILLIMETERS NOMINAL MM
SPECIAL FEATURESDUTY CLASS JM SERIES
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER95.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
D90971Reference document
Same NSN cross-reference
Reference document — Secondary reference
619696C91Reference document
Same NSN cross-reference
Reference document — Secondary reference
90971Reference document
Same NSN cross-reference
Reference document — Secondary reference
1P4694Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1318335Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy JM719149?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM719149?
JM719149 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace JM719149?
There are 5 known substitutes for JM719149: D90971, 619696C91, 90971 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM719149?
JM719149 is cataloged in the U.S. Government catalog under NSN 3110-00-357-9710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM719149