PartsTable
Technical Data Sheet
Download PDF

JM46SC9H036T — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM46SC9H036T: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHIONING, mounting_pad: INCLUDED, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 3.751 INCHES MINIMUM AND 3.781 INCHES MAXIMUM IN, style_designator: SADDLE ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-349-1647, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM46SC9H036T
NSN: 5340-01-349-1647
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
cushionINCLUDED
materialPLASTIC POLYTETRAFLUOROETHYLENE CUSHIONING
mounting_padINCLUDED
overall_width0.750 INCHES NOMINAL IN
overall_length3.751 INCHES MINIMUM AND 3.781 INCHES MAXIMUM IN
style_designatorSADDLE ARCH
surface_treatmentPASSIVATE
material_thickness0.063 INCHES NOMINAL IN
mounting_hole_size0.215 INCHES NOMINAL IN
inside_diameter/arch_length2.250 INCHES NOMINAL IN
distance_between_mounting_hole_centers3.251 INCHES MINIMUM AND 3.281 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch2.383 INCHES MINIMUM AND 2.423 INCHES MAXIMUM IN
NSN5340-01-349-1647
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM46SC9H036T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.215 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.251 INCHES MINIMUM AND 3.281 INCHES MAXIMUM IN
•
MOUNTING PAD: INCLUDED
•
STYLE DESIGNATOR: SADDLE ARCH
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
CUSHION: INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.215 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.251 INCHES MINIMUM AND 3.281 INCHES MAXIMUM IN
MOUNTING PADINCLUDED
STYLE DESIGNATORSADDLE ARCH
OVERALL LENGTH3.751 INCHES MINIMUM AND 3.781 INCHES MAXIMUM IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH2.383 INCHES MINIMUM AND 2.423 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
09A068-36CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
09A101-36CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
535SS36YSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM46SC9H036T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM46SC9H036T?
JM46SC9H036T is a STRAP,RETAINING.
What parts can replace JM46SC9H036T?
There are 3 known substitutes for JM46SC9H036T: 09A068-36C, 09A101-36C, 535SS36Y. Substitute compatibility should be verified for your specific system.
What is the NSN for JM46SC9H036T?
JM46SC9H036T is cataloged in the U.S. Government catalog under NSN 5340-01-349-1647. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM46SC9H036T

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.