PartsTable
Technical Data Sheet
Download PDF

JM44SC17D16R — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44SC17D16R: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: RUBBER SILICONE CLASS Q CUSHIONING, mounting_pad: INCLUDED, overall_width: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, overall_length: 2.390 INCHES NOMINAL IN, style_designator: SADDLE ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-059-7924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44SC17D16R
NSN: 5340-01-059-7924
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
cushionINCLUDED
materialRUBBER SILICONE CLASS Q CUSHIONING
mounting_padINCLUDED
overall_width0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
overall_length2.390 INCHES NOMINAL IN
style_designatorSADDLE ARCH
material_thickness0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
mounting_hole_size0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
inside_diameter/arch_length0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
material_document_and_classificationD6-54312-1, THE BOEING CO MFR REF SINGLE MATERIAL RESPONSE CUSHIONING
distance_between_mounting_hole_centers1.880 INCHES MINIMUM AND 1.940 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch1.015 INCHES MINIMUM AND 1.045 INCHES MAXIMUM IN
NSN5340-01-059-7924
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44SC17D16R MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.880 INCHES MINIMUM AND 1.940 INCHES MAXIMUM IN
•
MOUNTING PAD: INCLUDED
•
STYLE DESIGNATOR: SADDLE ARCH
•
MATERIAL DOCUMENT AND CLASSIFICATION: D6-54312-1, THE BOEING CO MFR REF SINGLE MATERIAL RESPONSE CUSHIONING
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.880 INCHES MINIMUM AND 1.940 INCHES MAXIMUM IN
MOUNTING PADINCLUDED
STYLE DESIGNATORSADDLE ARCH
MATERIAL DOCUMENT AND CLASSIFICATIOND6-54312-1, THE BOEING CO MFR REF SINGLE MATERIAL RESPONSE CUSHIONING
OVERALL LENGTH2.390 INCHES NOMINAL IN
OVERALL WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.015 INCHES MINIMUM AND 1.045 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 5
S387DH16Reference document
Same NSN cross-reference
Reference document — Secondary reference
512A16Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACC10GF16D-HReference document
Same NSN cross-reference
Reference document — Secondary reference
TA12C34D16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
513A16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM44SC17D16R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44SC17D16R?
JM44SC17D16R is a STRAP,RETAINING.
What parts can replace JM44SC17D16R?
There are 5 known substitutes for JM44SC17D16R: S387DH16, 512A16, BACC10GF16D-H and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44SC17D16R?
JM44SC17D16R is cataloged in the U.S. Government catalog under NSN 5340-01-059-7924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44SC17D16R

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.