PartsTable
Technical Data Sheet
Download PDF

JM44SC15D28T — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44SC15D28T: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHIONING, mounting_pad: NOT INCLUDED, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, overall_length: 3.116 INCHES MINIMUM AND 3.136 INCHES MAXIMUM IN, style_designator: SADDLE ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-350-2519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44SC15D28T
NSN: 5340-01-350-2519
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
cushionINCLUDED
materialPLASTIC POLYTETRAFLUOROETHYLENE CUSHIONING
mounting_padNOT INCLUDED
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
overall_length3.116 INCHES MINIMUM AND 3.136 INCHES MAXIMUM IN
style_designatorSADDLE ARCH
material_thickness0.064 INCHES NOMINAL IN
mounting_hole_size0.204 INCHES NOMINAL IN
inside_diameter/arch_length1.770 INCHES NOMINAL IN
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHIONING
distance_between_mounting_hole_centers2.690 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch1.856 INCHES NOMINAL IN
NSN5340-01-350-2519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44SC15D28T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.204 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.690 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: SADDLE ARCH
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHIONING
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.204 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.690 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORSADDLE ARCH
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHIONING
OVERALL LENGTH3.116 INCHES MINIMUM AND 3.136 INCHES MAXIMUM IN
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.856 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
421A28Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACC10CC28Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM44SC15D28T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44SC15D28T?
JM44SC15D28T is a STRAP,RETAINING.
What parts can replace JM44SC15D28T?
There are 2 known substitutes for JM44SC15D28T: 421A28, BACC10CC28. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44SC15D28T?
JM44SC15D28T is cataloged in the U.S. Government catalog under NSN 5340-01-350-2519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44SC15D28T

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.