PartsTable
Technical Data Sheet
Download PDF

JM44SC13H32T — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44SC13H32T: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: STEEL CORROSION RESISTING LOCATION NOT OTHERWISE SPECIFIED, overall_width: 0.625 INCHES NOMINAL IN, special_features: STRAP,RETAINING-CUSHIONED,TUBE SUPPORT,2 HOLE MOUNTING, style_designator: SADDLE ARCH, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-501-4803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44SC13H32T
NSN: 5340-01-501-4803
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
cushionINCLUDED
materialSTEEL CORROSION RESISTING LOCATION NOT OTHERWISE SPECIFIED
overall_width0.625 INCHES NOMINAL IN
special_featuresSTRAP,RETAINING-CUSHIONED,TUBE SUPPORT,2 HOLE MOUNTING
style_designatorSADDLE ARCH
material_thickness0.032 INCHES NOMINAL IN
mounting_hole_size0.199 INCHES NOMINAL IN
end_item_identificationFUEL VENT SYS INSTALL FOR F/A-18E/F
inside_diameter/arch_length2.000 INCHES NOMINAL IN
criticality_code_justificationAGAV
distance_between_mounting_hole_centers2.940 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency(INAVY)STRAP,RETAINING,AIRCRAFT
NSN5340-01-501-4803
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44SC13H32T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.199 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.940 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
STYLE DESIGNATOR: SADDLE ARCH
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CUSHION: INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.199 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.940 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONAGAV
STYLE DESIGNATORSADDLE ARCH
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CUSHIONINCLUDED
SPECIAL FEATURESSTRAP,RETAINING-CUSHIONED,TUBE SUPPORT,2 HOLE MOUNTING
PART NAME ASSIGNED BY CONTROLLING AGENCY(INAVY)STRAP,RETAINING,AIRCRAFT
END ITEM IDENTIFICATIONFUEL VENT SYS INSTALL FOR F/A-18E/F
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
848SS32-8TSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9M368S32TSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy JM44SC13H32T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44SC13H32T?
JM44SC13H32T is a STRAP,RETAINING.
What parts can replace JM44SC13H32T?
There are 2 known substitutes for JM44SC13H32T: 848SS32-8T, 9M368S32T. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44SC13H32T?
JM44SC13H32T is cataloged in the U.S. Government catalog under NSN 5340-01-501-4803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44SC13H32T

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.