PartsTable
Technical Data Sheet
Download PDF

JM44RC2WD18-35 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44RC2WD18-35: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 1.125 INCHES NOMINAL IN, loop_length: 2.188 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-144-5745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44RC2WD18-35
NSN: 5340-01-144-5745
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
loop_width1.125 INCHES NOMINAL IN
loop_length2.188 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorRECTANGULAR
tongue_hole_typeROUND, UNTHREADED
material_thickness0.051 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT AND OIL RESISTANT AND WEATHER RESISTANT
material_document_and_classificationQQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.802 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.584 INCHES NOMINAL IN
NSN5340-01-144-5745
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44RC2WD18-35 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT AND OIL RESISTANT AND WEATHER RESISTANT
•
LOOP WIDTH: 1.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT AND OIL RESISTANT AND WEATHER RESISTANT
LOOP WIDTH1.125 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 6715 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.802 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
13029973-9Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
10086818Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy JM44RC2WD18-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44RC2WD18-35?
JM44RC2WD18-35 is a CLAMP,LOOP.
What parts can replace JM44RC2WD18-35?
There are 2 known substitutes for JM44RC2WD18-35: 13029973-9, 10086818. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44RC2WD18-35?
JM44RC2WD18-35 is cataloged in the U.S. Government catalog under NSN 5340-01-144-5745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44RC2WD18-35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.