JM44RC2WD11-24 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44RC2WD11-24: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, loop_width: 0.688 INCHES NOMINAL IN, loop_length: 1.500 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-143-9756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44RC2WD11-24

NSN: 5340-01-143-9756
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
material	RUBBER CHLOROPRENE CLASS CR CUSHION
loop_width	0.688 INCHES NOMINAL IN
loop_length	1.500 INCHES NOMINAL IN
overall_width	0.500 INCHES NOMINAL IN
style_designator	RECTANGULAR
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.051 INCHES NOMINAL IN
cushioning_environmental_protection	HEAT AND OIL RESISTANT AND WEATHER RESISTANT
material_document_and_classification	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE OR SAE-6715 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end	1.458 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.240 INCHES NOMINAL IN
NSN	5340-01-143-9756

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: HEAT AND OIL RESISTANT AND WEATHER RESISTANT

•

LOOP WIDTH: 0.688 INCHES NOMINAL IN

•

STYLE DESIGNATOR: RECTANGULAR

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	HEAT AND OIL RESISTANT AND WEATHER RESISTANT
LOOP WIDTH	0.688 INCHES NOMINAL IN
STYLE DESIGNATOR	RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE OR SAE-6715 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.458 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

13029973-2Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

10086816Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM44RC2WD11-24?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44RC2WD11-24?

JM44RC2WD11-24 is a CLAMP,LOOP.

What parts can replace JM44RC2WD11-24?

There are 2 known substitutes for JM44RC2WD11-24: 13029973-2, 10086816. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44RC2WD11-24?

JM44RC2WD11-24 is cataloged in the U.S. Government catalog under NSN 5340-01-143-9756. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44RC2WD11-24 — CLAMP,LOOP

Request a Quote — JM44RC2WD11-24